Sorption filter
Description
Sorption filterevess® SFIt is used to treat wastewater from suspended solids and oil products in cases where the degree of wastewater treatment is required to meet the standards of discharge into fishery water bodies.
After the sand trap and/or oil and gasoline separator, the effluents enter the tertiary treatment unit of the sorption filterevess® SF, where they pass through the sorbent layer.
Construction
3 components are used as sorption material in the sorption compartment - natural mineral shungite, activated carbon, oil sorbent S-Verad. However, at the request of the customer, any other adsorbent (Zeolite, Sokirnit, etc.) can be used.
When changing the parameters of wastewater pollution, when using sorption filtersevess® SF, it is necessary to change the type of sorbent and continue operation.
Sorption Filtersevess® SFare manufactured with a capacity of up to 150 l/s.
Materials of manufacture
Sorption filter housingevess® SFIt is made of reinforced corrosion-resistant fiberglass.
| Consumption, hp | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Diameter, mm | 1600 | 1800 | 2000 | 2000 | 2000 | 2500 | 2500 | 2500 | 3200 | 3200 | 3200 | 3200 | 3200 | 3200 | 3200 | 3200 | 3200 |
| Length, mm | 2800 | 3500 | 4100 | 5000 | 5900 | 7700 | 7800 | 9200 | 8900 | 10000 | 11200 | 12250 | 12000 | 13000 | 12000 | 13000 | 13500 |
| Pipe diameter, mm | 160 | 200 | 200 | 250 | 250 | 315 | 315 | 315 | 400 | 400 | 400 | 400 | 400 | 450 | 450 | 500 | 500 |
| Weight, kg | 450 | 710 | 1000 | 1250 | 1480 | 1900 | 3000 | 3600 | 4500 | 5700 | 6800 | 7100 | 8500 | 9300 | 11700 | 12500 | 13000 |
