About evess

CompanyEvessprovides a full range of services for the development and manufacture of galvanic, ventilation, capacitive and other equipment made of polymeric materials of any level of complexity.

We are ready to offer project implementation “from pencil” to commissioning of equipment, with subsequent technical support.

With the help of highly qualified specialists of our company, we are ready to offer the following works:

• Design and manufacture of galvanic equipment with any degree of automation;
• Design and manufacture of treatment facilities for galvanic and other industrial wastewater;
• Design and manufacture of capacitive, ventilation and other equipment from polymeric materials;
• Development of non-standard equipment according to the Customer’s instructions;
• Creation of individual Automated Control Systems for technological complexes, with remote access via the Internet;
• Supply of equipment for galvanic production: pumping equipment, centrifuges for drying parts, galvanic drums and others;
• Manufacturing of different types of automatic operators for galvanic production;
• Manufacturing of drying installations;
• And much more depending on the needs of your production.

Currently the companyEvesshas its own production facilities equipped with modern high-tech equipment of European manufacture.

The manufactured equipment compliesGOST 12.2.003-91 "Occupational safety standards system. Production equipment".

All capacitive equipment complies  standardDVS 2205.

German standardDVS2205— is one of the few precise and legitimate standards in thermoplastic tank construction, which is recognized worldwide for calculating tanks of various designs.

The calculation of the design of galvanic and capacitive equipment was performed using a specialized programTANK DESIGNERaccording to standardDVS 2205.

For the production of galvanic equipment, evess uses various polymer and chemically resistant materials: polypropylene (PP), polyvinylidene fluoride (PVDF), polyvinyl chloride (PVC), polyethylene (PE), fiberglass, titanium, stainless steel and others.

The production of galvanic, capacitive, ventilation and other equipment is carried out by bending and welding polymer sheets on specialized equipment. For these purposes, materials from leading manufacturers are used:Rochling(Germany),SIMON(Germany),Early(Austria).

Depending on the technological requirements, galvanic equipment can have different dimensions and configuration. CompanyEvesscooperates with such manufacturers of galvanic line components as:Progalvano(Italy),Siebec(France),LM Finishing(Italy),Scandymet(Sweden),Bohemia(Czech Republic).

Galvanic baths, depending on their purpose, are equipped with the following elements:

• Electric heaters
• Heat exchangers
• Temperature and level sensors
• On-board suction
• Compressed air supply device (bubbling device)
• Solution mixing device
• Solution filtration device
• Anode/cathode rod rocking device
• Overflow pockets
• Catchers of technological satellites
• Shut-off and control valves
• Lids
• Thermal insulation

The equipment we produce is used for various technological processes:

We have experience in solving complex technological problems, developing and manufacturing non-standard galvanic equipment according to the Customer's needs. There are no restrictions for us on the types of galvanic lines, materials of manufacture and dimensions of galvanic baths. We develop automated control systems individually for each specific project, based on the tasks set by the Customer.

The implementation of competent technological solutions allows to increase the efficiency of the Customer’s production several times.

The process of creating a galvanic line consists of the following stages:

We offer our customers high-quality and environmentally friendly equipment for storing, cleaning and pumping wastewater. This is what gave our brand its name.evess^®. This name comes from two English words -eco(eco-friendly) andvessel(vessel, reservoir).

Equipmentevess^®is produced by qualified engineers and specialists.

The production is equipped with American equipment.MVP(Magnum Venus Products) computer controlled, allowing both circular and cross winding of reservoirs. MVP — is a world leader in the production of high-precision equipment for the manufacture of fiberglass products.

For our products we use high-quality polyester resins made in Germany.Synthopol Chemie, which guarantees the consumer the highest quality products according to European standards with a long service life.

Fiberglass, from which containers of the Evess brand are made^®, has important advantages:

• service life of more than 50 years, does not require operating costs
• low thermal conductivity (0.75 W/m grC)
• high strength (1700 MPa)
• chemical and biological resistance
• low specific gravity – 1.9 g/cm3
• high seismic resistance
• resistant to rotting, corrosion and UV rays
• acts as an excellent dielectric

Our company produces industrial containersevess^® made of special purpose fiberglass for storage, processing or transportation:

• water containers
• fire tanks
• fuel tanks
• containers for acids and alkalis
• Tanker trucks
• Bulk material containers
• containers for the food industry

It is possible to manufacture various types of products:

• horizontal and vertical execution
• underground and above-ground installation
• stationary and for transportation

In accordance with the technical specifications, tanks may have additional equipment:

• pumping equipment
• forced ventilation system
• liquid level sensor
• mixers
• piping and other options

Our company provides services for the design and manufacture of sewage pumping stations, water treatment stations, treatment facilities for storm water, industrial wastewater, and domestic wastewater.

We manufacture non-standard fiberglass products of any shape and size according to the customer’s technical specifications.

All products have the necessary certificates and meet high quality standards. The equipment is supplied in full factory readiness.

Our company's specialists are ready to provide you with the following services:

Calculation and determination of the optimal solution

Based on your needs, we will select the necessary equipment and components for the correct functioning of a particular engineering system. If necessary, we will develop non-standard solutions with subsequent implementation.

Production

We produce a wide range of high-quality equipment, in a short time, using modern technologies, in full compliance with the required characteristics.

Delivery

For your convenience, we deliver large and oversized products to the customer's site at the most favorable prices. The equipment is guaranteed to be delivered to the site in full safety and in accordance with the specification.

Installation manager

We carry out high-quality and guaranteed installation supervision work, which allows us to eliminate the risk of errors during installation, commissioning and further operation of the equipment.

Commissioning works

We perform a full and wide range of commissioning works, adjustment and restoration of the initial characteristics of various devices and mechanisms, which will allow solving many serious problems with minimal losses. Commissioning works are performed by highly qualified engineering and technical specialists.

Service maintenance

As part of after-sales service, we carry out organizational and technical measures to prevent operation, as well as eliminate any malfunctions and errors that arise during equipment operation.

Repair

Our company can carry out a range of works to restore any parts of the tank directly at the customer’s site.

Our team of specialists is always happy to help in selecting equipment and the optimal process flow diagram, and provide information related to the installation of equipment and its maintenance.

We are always open to new projects and aim for fruitful, mutually beneficial and long-term cooperation. We will be glad to see you among our regular customers!